Energy efficiency in computers describes how much useful work a device does for the electricity it uses. A more efficient computer completes the same tasks while drawing less power, which can lower energy use and electricity costs over time. How much energy a computer actually uses depends on its components, its power settings, and how it's used each day.
This page is part of our sustainability glossary, which explains common terms and the specific details behind them.
Energy Efficiency Essentials at a Glance
Power is measured in watts (W), and energy use over time in kilowatt-hours (kWh)
The processor, graphics, display, and power supply account for most of a computer's power draw
Sleep, power modes, and screen brightness have a big effect on daily energy use
Newer components often deliver more performance for each watt they use
Certifications such as ENERGY STAR® set defined criteria for energy use
How Is Computer Power Consumption Measured?
Watts (W): How much power a device draws at a given moment. A laptop on a light task might draw far less than a gaming desktop running a demanding game.
Kilowatt-hours (kWh): How much energy a device uses over time. One kWh equals 1,000 watts used for one hour, and it's the unit on most electricity bills.
Typical energy consumption: An estimate of the energy a device uses in a year under a standard pattern of use, often listed by certification programs.
Power draw changes constantly. A computer uses the most power under heavy load, less when idle, and very little in sleep.
Where Does a Computer Use Power?
Component | How it affects power use |
Draws more power under heavy workloads and less when idle | |
Dedicated graphics can be the largest power draw during games and 3D work | |
Display | Larger, brighter, and higher-refresh screens use more power |
Solid-state drives (SSDs) typically use less power than spinning hard disk drives (HDDs) | |
Some power is lost as heat during conversion; more efficient units lose less | |
Fans and accessories | Cooling fans and connected devices add to the total |
What you do on the computer matters as much as the hardware. Gaming, rendering, and video editing use far more power than browsing or writing documents.
What Is Power Management?
Power management is the set of settings and features that control how much power a computer uses based on what it's doing. Most savings come from reducing power when the computer is idle or doing light work.
Sleep, hibernate, and shut down
State | What happens | Power use |
Sleep | Keeps your work in memory for a quick resume | Very low |
Hibernate | Saves your work to storage and powers down | Close to none |
Shut down | Closes everything and turns the computer off | Close to none |
Setting your computer to sleep after a short period of inactivity is one of the simplest ways to cut idle energy use.
Power modes
In Windows 11, you'll find power options under Settings, System, and Power and battery (or Power on desktops). Power modes such as best power efficiency, balanced, and best performance change how the processor and other components use power. Many laptops also offer an energy or battery saver mode that limits background activity.
Display settings
The display is one of the largest power users on a laptop. Lowering brightness, shortening the screen timeout, and using adaptive brightness can reduce energy use. On organic light-emitting diode (OLED) displays, dark mode can also lower power use, because dark pixels use less power.
Manufacturer power tools
Many computers include their own software for power and performance settings, such as thermal or battery modes. Check your device's preinstalled apps or support documentation for the options available.
Components and Design Choices That Affect Energy Use
Newer processors: Each processor generation often delivers more performance for each watt. Hybrid designs with performance and efficient cores can handle light tasks with less power.
Neural processing units (NPUs): On computers that have one, an NPU can run some AI features using less power than the CPU or GPU would. Learn more about the NPU.
Integrated vs. dedicated graphics: Integrated graphics use less power for everyday tasks, while dedicated graphics draw much more under load.
Solid-state storage: SSDs typically use less power than HDDs and have no spinning parts.
Power supply efficiency: In desktops, a more efficient power supply wastes less power as heat. Learn about 80 PLUS ratings in our guide to power supplies.
Form factor and sizing: Laptops and mini PCs generally use less power than full-size towers. Choosing a computer sized for your tasks helps avoid running more hardware than you need.
How to Estimate a Computer's Energy Use
You can make a rough estimate with a simple formula:
Energy use (kWh) = average power (W) x hours of use ÷ 1,000
For example, a computer that averages 50W over 8 hours a day uses about 0.4 kWh that day. Multiply by your electricity rate, found on your utility bill, to estimate the cost. Actual power draw varies with workload, so a plug-in power meter gives a more accurate reading.
Energy Certifications for Computers
ENERGY STAR®, a program of the U.S. Environmental Protection Agency (EPA), sets energy-use criteria for computers, monitors, printers, and other products. A product that meets them is described as "ENERGY STAR certified." Certification applies to specific models and markets, so you can confirm a model with the product finder on the ENERGY STAR website. Other programs, such as EPEAT and TCO Certified, include energy criteria alongside other requirements. Learn more about ecolabels and certifications.
Everyday Tips to Lower a Computer's Energy Use
Set your computer to sleep after a short period of inactivity.
Lower screen brightness and shorten the screen timeout.
Use a balanced or power-efficiency mode for everyday tasks.
Shut down or hibernate when you won't use the computer for a long time.
Unplug or switch off accessories you aren't using.
Keep vents clean so fans don't have to work harder. Learn more about cooling.
Keep your operating system and drivers updated, since updates can improve power management.
Frequently Asked Questions About Energy Efficiency
How much power does a computer use?
How much power a computer uses depends on its type and workload. Laptops and mini PCs typically draw less power than tower desktops, and any computer draws far more under heavy loads like gaming or rendering than when browsing or idle. A plug-in power meter shows a specific computer's actual use.
Is sleep mode or shutting down better for saving energy?
Shutting down or hibernating uses the least energy, while sleep uses a very small amount to keep your work in memory. For short breaks, sleep is convenient and uses little power. For long periods, such as overnight, shutting down or hibernating saves more.
Does screen brightness affect energy use?
Screen brightness has a noticeable effect on energy use, especially on laptops, where the display is one of the largest power users. Lowering brightness and shortening the screen timeout can reduce energy use and extend battery life.
What does ENERGY STAR certified mean?
ENERGY STAR certified means a specific product model has met the energy-use criteria set by the ENERGY STAR program, run by the U.S. Environmental Protection Agency. You can check whether a model is certified with the product finder on the ENERGY STAR website.
Related Topics
Sustainability glossary: common terms and the specific details behind them
Ecolabels and certifications: ENERGY STAR, EPEAT, and TCO Certified
Carbon footprint: product carbon footprint, carbon neutral, and net zero
Power supplies: wattage, efficiency ratings, and modular designs