For print service providers
HP’s roll-to-roll wide format printers are designed to tackle high-volumes of large-format signage and decorative applications, ensuring high-quality printing at a pace that is difficult to match.
Accelerate production efficiency
Accelerate production efficiency
Accelerate your business with vivid colors at up to 958 ft²/hr (89 m²/hr).¹ Reduce interruptions and gain radical efficiency with HP Professional Print Service Plans.²
Print your way to higher margins
Print your way to higher margins
Extend your offer with the whitest white.³ Grow into high-margin jobs with 30% wider color gamut⁴ and choose from a wide range of signage and décor applications.
Safeguard health and the environment
Safeguard health and the environment
Water-based HP Latex inks are the most environmentally certified technology⁵—no hazardous air pollutants,⁶ odorless prints,⁷ recyclable ink carton cardboard⁸ and eco-conscious media.⁹
Explore the HP Latex 2700 printer series
Help save time and money with an intuitive interface featuring guidance for job preparations.
Accelerate your production efficiency with vivid colors at up to 958 ft²/hr (89 m²/hr).¹
Reduce interruptions with fully automated printhead maintenance.
Print long runs unattended with single roll up to 660 lb (300 kg).¹¹
Forget yellowing over time. Plus, avoid repeated maintenance and white ink waste with automatic ink recirculation and offline rotating chamber.³
Achieve more gamut colors and grow into higher-margin applications.
No hazardous air pollutants,⁶ odorless prints,⁷ recyclable ink carton cardboard,⁸ and eco-conscious media.⁹
Help radically improve efficiency with proactive support, workflow control, and trainings to grow.
Meet the family
HP Latex 2700 printer
Core features:
- 126-in (3.2 m) maximum media width
- Single roll up to 660 lb (300 kg)¹¹
- 5-liter color cartridge
- Color speeds up to 1302 ft²/hr (121 m²/hr) outdoor
- Optional Jumbo Dual Roll Kit and Ink Collector Kit
- 1-year warranty
HP Latex 2700 W printer
Core features:
- 126-in (3.2 m) maximum media width
- Single roll up to 660 lb (300 kg)¹¹
- 5-liter color cartridge
- Color speeds up to 1302 ft²/hr (121 m²/hr) outdoor
- Optional Jumbo Dual Roll Kit and Ink Collector Kit
- 1-year warranty
Differentiating features:
- 3-liter white cartridges
- White speeds up to 581 ft²/hr (54 m²/hr)
This printer is intended to work only with cartridges that have a new or reused HP chip, and it uses dynamic security measures to block cartridges using a non-HP chip. Periodic firmware updates will maintain the effectiveness of these measures and block cartridges that previously worked. A reused HP chip enables the use of reused, remanufactured, and refilled cartridges.⁶
Open the door to more applications and margins
Open the door to more applications and margins
HP Latex 2700 printer series wins PRINTING United Alliance 2023 Pinnacle Product Award for Output category.
Discover more about HP Latex Technology
HP Professional Print Service Plans²
Help radically improve efficiency with proactive support, workflow control, and online training.
Water-based HP Latex inks
Made with up to 65% water, HP Latex inks are designed to avoid the hazards associated with UV printing, providing outstanding health and safety performance.
Partner solutions
Enable your business to print without limitations with a range of HP and HP partner solutions designed to maximize productivity.
Disclaimers
- Based on internal HP testing, March 2022. Outdoor mode 3-pass, 6-color, 90%.
- Some services depend on printer, service contract, and region availability.
- Whitest white based on ISO/DIS 23498 compared to top sellers competitive alternatives using UV technology between $100,000 and $200,000 USD as of February 2022. Test performed on black opaque self-adhesive vinyl (L*:2.35 – a:2.73 - b:4.26) with 260% Spot printmode using HP 883 3-liter White Latex Ink Cartridge. Visual opacity = 94.7%. White ink available for HP Latex 2700 W printer only. When HP 886 White Latex Printheads are placed in the storage cassettes, no white ink is used for servicing when printheads are not in use.
- 30% wider gamut based on testing commissioned by HP and performed by Venture Electronics Spain, S.L. in February 2022 comparing the HP Latex 2700 Printer series and comparable top sellers competitive alternatives using UV technology between $100,000 and $200,000 USD as of February 2022, by comparing gamut volume in CIE Lab units (the higher, the better) printing on Avery MPI3001 and Indoor printmodes. Test performed under the same conditions in all printers measuring the ECI2002 target with the FD-9 spectrophotometer from Konica Minolta.
- Applicable to HP Latex technology compared to competitive large-format printing alternatives using solvent and UV technologies. Not all certifications are applicable for all generations of HP Latex inks. See individual product data sheets for more information at https://www.hp.com/go/latex.
- HP Latex inks were tested for Hazardous Air Pollutants, as defined in the Clean Air Act, per U.S. Environmental Protection Agency Method 311 (testing conducted in 2013) and none were detected.
- Applicable to HP Latex inks. Based on sensory evaluations conducted by Odournet done according to VDI Guideline 3882 where 883 inks were characterized as "weak" in odor intensity and "neutral" for hedonic tone. There is a broad set of media with very different odor profiles. Some of the media can affect the odor performance of the final print.
- The ink cartridge HP Eco-Carton outer carton is 100% recyclable through local cardboard/paper programs. The inner materials including the ink bag and printheads can be returned free of charge to the HP Planet Partners program for reprocessing of plastic parts. Zero landfill. For ink bag and printhead take back, visit https://www.hp.com/recycle to see how to participate and for HP Planet Partners program availability; program may not be available in your jurisdiction. Where this program is not available, and for other consumables not included in the program, consult your local waste authorities on appropriate disposal.
- HP applications experts have evaluated the catalog of media listed in the HP Media Locator based on internal criteria to identify those that provide alternative solutions with certain environmental benefits compared to the typical media within the same application type. The information in media locator is provided by the media substrate vendors. HP is not responsible for the veracity of the information from third-party companies published on the HP website. See https://www.hp.com/go/mediasolutionslocator.
- While CMYK and Optimizer are duplicated with symmetrical double printheads, Overcoat, Light Magenta and Light Cyan rely on single printheads.
- HP Latex 2700 and 2700 W printers support single roll up to 353 lb (160 kg) and can also support up to 660 lb (300 kg) by purchasing separately HP 126-in Diverter Roller or HP Latex 2700 Series Jumbo Dual Roll Kit accessories. Dual roll option must be purchased separately.
- Learn more at https://www.hp.com/learn/ds.
- Based on internal HP testing, March 2022. Indoor mode 4-pass, 6-color, 110%.
- Based on internal HP testing, March 2022. Printed on Clear Self-Adhesive Vinyl, mode spot, 100%.
- Based on internal HP testing, March 2022. Mode 4-pass, 110%.
- Based on internal HP testing, March 2022. Stretch performed at room temperature (23°C ± 2°C, 50 % RH ± 5% RH) with an Instron tensiometer, at a jaw separation speed of 300 mm/min. Strips of 200 mm length and 2.5 cm wide. dE calculated according to DELTA E CIE2000. Printed on vinyl cast media, mode 8-pass, 110% ink.