Follow the steps listed below to print cleaning page.
- Print a copy of this Web page, and walk over to the printer you are troubleshooting.
- Load either 8.5 x 11-inch paper (letter) or A4 in Tray 2 of your printer.
CAUTION: For best cleaning results, please use copier paper with a smooth surface. Weight: 64g/m² - 90g/m² (17lb - 24lb).
- Press the Menu button to enter the Main Menu on the control panel of the printer.
- Press the Down arrow button to highlight Device Maintenance menu, then press the OK button to select it.
- Press the Down arrow button to highlight Calibration/Cleaning menu, then press the OK button to select it.
- Press the Down arrow button to highlight Print Cleaning Page menu, then press the OK button to select it.
Note:The message "Cleaning..." displays on the control panel until the printer finishes printing the fuser cleaning page.
- Discard the printed page. The task is complete.
- The printer returns to the Ready state, after printing the fuser cleaning page.
Please let HP know if this helped you to resolve your issue, and help HP improve service.