DesignJet

FAQs

Note: The following content serves as general information and not an authorization from HP. For assistance, please contact HP technical support and for latest product information, please browse / visit the HP store. Refer to Terms & Conditions for more info.

Q1: What is large format printers
An Ink Tank printer is a type of printer that uses an external tank to store ink, rather than using cartridges. The tanks are usually filled with a large amount of ink, which can last for hundreds of pages. This type of printer is often more cost-effective than traditional cartridge-based printers, as the Ink Tanks can be refilled or replaced at a much lower cost.

Q2: What DPI do I need for large format printing?
The DPI (dots per inch) required for large format printing depends on the size of the print and the desired quality. Generally, a minimum of 150 DPI is recommended for large format prints, but higher resolutions may be needed for higher quality prints.

Q3: What are large format printers used for?
Large format printers are used for printing large-sized documents such as posters, banners, signs, and other large-format graphics. They are also used for printing on a variety of materials such as paper, vinyl, canvas, and fabric.

Q4: Can Designjet print on vinyl?
Yes, Designjet printers can print on vinyl.

Q5: Is DesignJet the same as inkjet?
No, DesignJet is a brand of large-format printers, while InkJet is a type of printer technology.

Q6: How do I print from HP DesignJet?
Follow the below steps to print from HP DesignJet printer:

1. Connect the printer to your computer using a USB cable.
2. Install the HP DesignJet printer driver on your computer.
3. Open the document or image you want to print.
4. Select File > Print.
5. Select your HP DesignJet printer from the list of available printers.
6. Select the desired print settings and click Print.

Q7: How do I scan with HP DesignJet?
Here is a step by step process to scan with HP DesignJet printer:

1. Make sure the printer is powered on and connected to your computer.
2. Open the HP DesignJet software on your computer.
3. Select the “Scan” option from the main menu.
4. Select the type of scan you want to perform.
5. Select the scan resolution and other settings.
6. Click the “Scan” button to begin the scan.
7. When the scan is complete, the scanned image will be displayed on your computer screen.

Q8: How do I install HP DesignJet driver?
Follow the below steps carefully to install HP DesignJet driver:

1. Download the HP DesignJet driver from the HP website.
2. Open the downloaded file and follow the on-screen instructions to install the driver.
3. Once the installation is complete, restart your computer.
4. Connect the HP DesignJet printer to your computer using a USB cable.
5. Open the Printers and Scanners settings in Windows and select the HP DesignJet printer.
6. Select the driver you just installed and click Apply.
7. Your HP DesignJet printer should now be ready to use.