 | | View a Storage Event |
There are two ways to view a storage event:
| | Create a Storage by Type Group |
You can create a search for systems of type, such as ESL or MSL, for tape libraries or create a search for Web Agents of type for each type of Command View system. HP StorageWorks Command View SDM. search for Web Agent == HP StorageWorks Command View SDM. HP StorageWorks Command View XP. search for Web Agent == HP StorageWorks Command View xp. HP StorageWorks Command View ESL. search for Web Agent == HP StorageWorks Command View ESL. HP StorageWorks Tape Libraries. search for system type == storage device. HP StorageWorks Management Appliance. search for Web Agent == Management module hp_OpenView_Storage_Management_Appliance or Web Agent == Management Module OpenSANManager.
| | Event Collection and Launch |
In order to receive events, the Command View software must be configured to send SNMP events to the HP Systems Insight Manager CMS. For Command View SDM: To configure the SNMP trap destination on Windows NT 4.0 on the Command View server Select Start SettingsControl PanelNetworkServicesSNMP Service. The SNMP Service Properties dialog box is displayed. Click Traps. Enter a community name, such as public. Click [Add]. At the bottom of the dialog box, click [Add]. The SNMP Service Configuration dialog box is displayed. Enter the hostname or IP address of the enterprise management station, and click [Add]. The SNMP trap destination is added. Click [OK] to save the changes and close the dialog box.
To configure the SNMP trap destination on Windows 2000 Click StartSettingsControl PanelNetworkServicesSNMP Service
The SNMP Service Properties dialog box is displayed. Click Traps. Enter a community name, such as public. Click [Add to list]. At the bottom of the dialog box, click [Add]. The SNMP Service Configuration dialog box is displayed. Enter the hostname or IP address of the enterprise management station, and click [Add]. The SNMP trap destination is added. Click [OK] to save the changes and close the dialog box.
To configure the SNMP trap destination on HP-UX Using a text editor, open the following file:
/etc/snmpd.conf
Insert the following information at the end of the snmpd.conf file:
trap-dest:
X.X.X.X
Replace the X.X.X.X with the IP address of the enterprise management station. Save the snmpd.conf file and close it. Kill the SNMP daemon by entering the following at a shell command prompt:
ps -ef | grep snmpd
kill -9
PID
Replace PID with the process ID returned by the previous command. Restart the SNMP daemon by entering the following at a shell command prompt:
snmpd
To load the HSV MIB on the CMS for EVA: On a Windows operating system go to a command prompt. Navigate to \Program Files\HP\System Insight manager\mibs directory. Refer to MIBs - Registering a MIB for more information regarding MIBs. Run mxmib -a cpqhsv110v3.cfg
| | Related Procedures |
| | About Storage |
| | Related Topics |
|
