Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
 
HP ProCurve Networking

» My ProCurve Sign In

HP ProCurve Networking  >  Technical support  >  Manuals

Manuals


  »

HP ProCurve Networking

Manuals below are for these products

  • J4138A ProCurve Routing Switch 9308m
  • J4139A ProCurve Routing Switch 9304m
  • J4140A ProCurve 9300 10/100 Module
  • J4141A ProCurve 9300 10/100 Management Module
  • J4142A ProCurve 9300 100Base-FX Module
  • J4143A ProCurve 9300 Gigabit-SX Module
  • J4144A ProCurve 9300 Gigabit-SX Management Module
  • J4145A ProCurve 9300 Gigabit LX/SX Module
  • J4146A ProCurve 9300 Gigabit LX/SX Management Module
  • J4147A ProCurve 9300 Redundant Power Supply
  • J4840A ProCurve Routing Switch 6308m-SX
  • J4841A ProCurve Switch 6208m-SX
  • J4842A ProCurve 9300 1000Base-T Module
  • J4844A ProCurve 9300 Gigabit-LX Module
  • J4845A ProCurve 9300 Gigabit-LX Redundant Management Module
  • J4846A ProCurve 9300 Gigabit-SX Redundant Management Module
  • J4847A ProCurve 9300 Redundant Management Module
  • J4856A ProCurve 9300 Mini-GBIC Module
  • J4857A ProCurve 9300 Mini-GBIC Redundant Management Module
  • J4874A ProCurve Routing Switch 9315m
  • J4875A ProCurve 9315 Redundant Power Supply
  • J4879A ProCurve 9300 T-Flow Redundant Management Module
  • J4881A/B ProCurve 9300 EP 48-port 10/100-TX RJ-45 Module
  • J4885A ProCurve 9300 EP 8-port Mini-GBIC Redundant Management Module
  • J4889A/B ProCurve 9300 EP 48-port 10/100-TX Telco (RJ-21) Module
  • J4891A ProCurve 9300 10 Gb 10 km Module
  • J4894A ProCurve 9300 EP 16-port Mini-GBIC Module
  • J4895A ProCurve 9300 EP 16-port 100/1000-T Module
  • J8174A ProCurve 9300 2-Port 10 GbE Module
  • J8178A ProCurve 9300 EP 100Base-FX Module
» View manuals for a different group of products

Customer Care

»  Overview
»  Services
»  Support
   »  Software
   »  Warranty
   »  FAQs
   »  Manuals
   »  Reference library
   »  Configuration examples
   »  Support forms
   »  Security notices

My ProCurve gives you instant access to software update notifications.
» Register or log in now

Commercial help me agent » Contact ProCurve
» Download Adobe Acrobat Reader
For software version 08.0.01k
» Release Notes for the ProCurve 9300 Series Routing Switches, Software Version 08.0.01K
(May 2007, PDF: 1.03 MB)
For software version 07.8.01d
» Read Me First for the ProCurve 9300 Series Routing Switches, Software Version 07.8.01d
(March 2006, PDF: 216 KB)
» Release Notes for the ProCurve 9300 Series Routing Switches, Software Version 07.8.03
(April 2007, PDF: 560 KB)
» Release Notes for the ProCurve 9300 Series Routing Switches, Software Version 07.8.01d
(March 2006, PDF: 412 KB)
For software version 07.8.00a
» Read Me First for ProCurve 9300 Series Routing Switches (June 2005, PDF: 299 KB)
» Release Notes for ProCurve 9300 Series Routing Switches, Software Version 07.8.00a
(December 2004, PDF: 1.60 MB)
» Quick Start Guide for ProCurve 9300 Series Routing Switches (June 2005, PDF: 1.25 MB)
Installation and Basic Configuration Guide for ProCurve 9300 Series Routing Switches (June 2005)
» Entire Manual (PDF: 7.92 MB)
» Front Cover
» Front Section
» Contents
» Organization of Product Documentation
» Safety and EMC Regulatory Statements
» Chapter 1: Getting Started
» Chapter 2: Installation
» Chapter 3: Using Redundant Management Modules
» Chapter 4: Using the T-Flow Redundant Management Module
» Chapter 5: Using the 2-Port 10-Gigabit Ethernet Module
» Chapter 6: Configuring Basic Features
» Chapter 7: Configuring Trunk Groups and Dynamic Link Aggregation
» Chapter 8: Configuring Spanning Tree Protocol (STP) and Advanced STP Features
» Chapter 9: Configuring Uni-Directional Link Detection (UDLD)
» Chapter 10: Configuring Metro Features
» Chapter 11: Configuring Virtual LANs (VLANs)
» Chapter 12: Configuring IP Multicast Traffic Reduction
» Chapter 13: Configuring GARP VLAN Registration Protocol (GVRP)
» Chapter 14: Enabling the FDP and Reading Cisco Discovery Protocol (CDP) Packets
» Chapter 15: Updating Software Images and Configuration Files
» Appendix A: Using Syslog
» Appendix B: Enhanced Performance (EP) Chassis Modules
» Appendix C: Software Specifications
» Appendix D: Hardware Specifications
» Appendix E: Cautions and Warnings
» Index
» Back Cover
Advanced Configuration and Management Guide for ProCurve 9300/9400 Series Routing Switches (June 2005)
» Entire Manual (PDF: 8.38 MB)
» Front Cover
» Front Section
» Contents
» Organization of Product Documentation
» Chapter 1: Getting Started
» Chapter 2: Configuring Quality of Service
» Chapter 3: Configuring Enhanced Quality of Service
» Chapter 4: Software-Based IP Access Control Lists (ACLs)
» Chapter 5: Hardware-Based IP Access Control Lists (ACLs)
» Chapter 6: Configuring Rate Limiting on the 9300 Series (with M2, M4, and T-flow)
» Chapter 7: Configuring EP Rate Limiting on the 9300 Series (with EP Modules)
» Chapter 8: Configuring Rate Limiting on the 9408sl
» Chapter 9: Configuring IP
» Chapter 10: Configuring RIP
» Chapter 11: Configuring IP Multicast Protocols (9300 Series Only)
» Chapter 12: Configuring OSPF
» Chapter 13: Configuring BGP4
» Chapter 14: Configuring MBGP (9300 Series Only)
» Chapter 15: Network Address Translation (9300 Series Only)
» Chapter 16: Configuring VRRP and VRRPE
» Chapter 17: Configuring IPX (9300 Series Only)
» Chapter 18: Configuring AppleTalk (9300 Series Only)
» Chapter 19: Route Health Injection (9300 Series Only)
» Appendix A: Remote Network Monitoring
» Appendix B: Policies and Filters
» Index
» Back Cover
Command Line Interface Reference for ProCurve 9300/9400 Series Routing Switches (June 2005)
» Entire Manual (PDF: 5.87 MB)
» Front Cover
» Front Section
» Contents
» Organization of Product Documentation
» Chapter 1: Getting Started
» Chapter 2: Using the Command Line Interface
» Chapter 3: Command List
» Chapter 4: User EXEC Commands
» Chapter 5: Privileged EXEC Commands
» Chapter 6: Global CONFIG Commands
» Chapter 7: Redundant Management Module CONFIG Commands
» Chapter 8: Interface Commands
» Chapter 9: Trunk Commands
» Chapter 10: IP Access Lists: Standard
» Chapter 11: IP Access Lists: Extended
» Chapter 12: IPv6 Access List Commands
» Chapter 13: RIP Commands
» Chapter 14: IPv6 RIP Commands
» Chapter 15: OSPF Commands
» Chapter 16: OSPF Version 3 Commands
» Chapter 17: BGP4 Commands
» Chapter 18: Global BGP and BGP4 Unicast Address Family Commands
» Chapter 19: BGP4 Multicast Address Family Commands
» Chapter 20: IPv6 BGP Unicast Address Family Commands
» Chapter 21: IP Tunnel Commands
» Chapter 22: MSDP Commands
» Chapter 23: DVMRP Commands
» Chapter 24: PIM Commands
» Chapter 25: IPv6 PIM Commands
» Chapter 26: Broadcast and Multicast Filter Commands
» Chapter 27: Route Map Commands
» Chapter 28: VRRP Commands
» Chapter 29: VRRPE Commands
» Chapter 30: VLAN Commands
» Chapter 31: Metro Ring Commands
» Chapter 32: VSRP Commands
» Chapter 33: Topology Group Commands
» Chapter 34: GVRP Commands
» Chapter 35: STP Group Commands
» Chapter 36: 802.1X Port Security Commands
» Chapter 37: MAC Port Security Commands
» Chapter 38: Real Server Commands
» Chapter 39: Application Port Commands
» Chapter 40: Show Commands
» Appendix A: Commands That Require a Reload
» Back Cover
Security Guide for ProCurve 9300/9400 Series Routing Switches (June 2005)
» Entire Manual (PDF: 1.61 MB)
» Front Cover
» Front Section
» Contents
» Organization of Product Documentation
» Chapter 1: Getting Started
» Chapter 2: Securing Access to Management Functions
» Chapter 3: Configuring Secure Shell
» Chapter 4: Configuring 802.1X Port Security
» Chapter 5: Using the MAC Port Security Feature
» Chapter 6: Configuring Multi-Device Port Authentication
» Chapter 7: Protecting Against Denial of Service Attacks
» Chapter 8: Configuring CPU Protection
» Chapter 9: Configuring Unicast RPF
» Chapter 10: Securing SNMP Access
» Index
» Back Cover
Diagnostic Guide for ProCurve 9300/9400 Series Routing Switches (June 2005)
» Entire Manual (PDF: 504 KB)
» Front Cover
» Front Section
» Contents
» Organization of Product Documentation
» Chapter 1: Getting Started
» Chapter 2: Using Diagnostic Commands
» Chapter 3: HP Diagnostic Command Reference
» Chapter 4: Using the Backplane Debugging Commands
» Chapter 5: Changing CAM Partitions
» Back Cover
» Removing and Installing XENPAK Optics (June 2005, PDF: 128 KB)
For software version 07.7.01
» Release Notes for Version 07.7.01 (May 2004, PDF: 1.58 MB)
For software version 07.6.04
» Release Notes for Version 07.6.04 (Edition 2, March 2004, PDF: 833 KB)
» Read Me First for the HP ProCurve Routing Switches 9304m, 9308m, and 9315m
(Edition 2, March 2004, PDF: 830 KB)
» Quick Start Guide for the HP ProCurve Routing Switches 9304m, 9308m, and 9315m
(Edition 1, September 2003, PDF: 2.31 MB)
» Removing and Installing XENPAK Optics on the J8174A ProCurve 9300 2-Port 10 GbE Module
(Edition 1, September 2003, PDF: 48 KB)
Installation and Basic Configuration Guide for the HP ProCurve Routing Switches 9304m, 9308m, and 9315m (Software Release 07.6.04 or Greater; September, 2003)
» Entire Manual (6.19 MB)
Advanced Configuration and Management Guide for the HP ProCurve Routing Switches 9304m, 9308m, and 9315m (Software Release 07.6.04 or Greater, September 2003)
» Entire Manual (8.7 MB)
Command Line Interface Reference for the HP ProCurve Routing Switches 9304m, 9308m, and 9315m (Software Release 07.6.04 or Greater, September 2003)
» Entire Manual (4.61 MB)
Security Guide for the HP ProCurve Routing Switches 9304m, 9308m, and 9315m (Software Release 07.6.04 or Greater, September 2003)
» Entire Manual (1.91 MB)
Diagnostics Guide for the HP ProCurve Routing Switches 9304m, 9308m, and 9315m (Software Release 07.6.04 or Greater, September 2003)
» Entire Manual (1.07 MB)
For software version 07.5.x and 07.6.00
» Read Me First for the HP ProCurve Routing Switches 9304m, 9308m, and 9315m
(Edition 10, October 2002)
» Read Me First for the HP ProCurve Routing Switches 9304m, 9308m, and 9315m
(Edition 9, June 2002)
» Release Notes for Version 07.6.00 (Edition 2, October 2002)
» Release Notes for Version 07.5.04 (Edition 1, July 2002)
» Quick Start Guide for the HP ProCurve Routing Switches 9304m, 9308m, and 9315m
(Edition 1, June 2002)
» Manual Supplement: Version 07.5.04 Operating System: T-Flow Redundant Management Module
(Edition 1, October 2002)
Installation and Getting Started Guide for the HP ProCurve Routing Switches 9304m, 9308m, and 9315m (Software Release 07.5.04 or Greater; May 2002)
» Entire Manual (6.53 MB)
Advanced Configuration and Management Guide for the HP ProCurve Routing Switches 9304m, 9308m, and 9315m (Software Release 07.5.04 or Greater; May 2002)
» Entire Manual (10.67 MB)
Security Guide for the HP ProCurve Routing Switches 9304m, 9308m, and 9315m (Software Release 07.5.04 or Greater; May 2002)
» Entire Manual (1.88 MB)
Command Line Interface Reference for the HP ProCurve Routing Switches 9304m, 9308m, and 9315m (Software Release 07.5.04 or Greater; May 2002)
» Entire Manual (4.51 MB)
For software version 06.6.28 and 07.1.x
» Caution Notice on Single-Instance STP Issue when Migrating from 06.6.x to 07.1.x in the HP ProCurve 9304m and 9308m Routing Switches (May 2001)
» Read Me First for the HP ProCurve Routing Switches 9304m, 9308m, and 6308m-SX and the HP ProCurve Switch 6208m-SX (Edition 7, February 2001)
» Release Notes for Version 07.1.24 (September 2001)
» Release Notes for Version 06.6.36 (September 2001)
» Release Notes for Versions 06.6.33 and 07.1.22 (March 2001)
» Release Notes for Versions 06.6.28 and 07.1.10 (December 2000)
» Installing and Removing a Mini-GBIC: A Manual Supplement for the HP ProCurve Routing Switch 9304m and 9308m (Edition 1, February 2001)