Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
 
HP ProCurve Networking

» My ProCurve Sign In

HP ProCurve Networking  >  Technical support  >  Configuration examples

Configuration examples


  »

HP Networking



These configuration examples apply to typical, simple situations. They can be easily customized to meet the needs of your environment. The examples below are for these products:

  • J4138A HP ProCurve Routing Switch 9308m
  • J4139A HP ProCurve Routing Switch 9304m
  • J4840A HP ProCurve Routing Switch 6308m-SX

» View configuration examples for a different group of products

Customer Care

»  Overview
»  Services
»  Support
   »  Software
   »  Warranty
   »  FAQs
   »  Knowledge Base
   »  Manuals
   »  Reference library
   »  Configuration examples
   »  Support forms
   »  Security notices
Commercial help me agent » Contact ProCurve

Notes

  1. These configurations have been tested and verified by HP ProCurve support engineers. However, HP does not guarantee that these exact configurations will work in your environment.
  2. You will need to modify these configurations depending on your model of switch, software version, VLAN port assignment, and your network's IP addresses.
  3. Information on how to troubleshoot configuration problems, including configurations based upon these examples, is not provided here. Please refer to the Troubleshooting chapter of your product manual for this type of information. If you need assistance from HP, please refer to the HP ProCurve Service & Support Guide (pdf: 165 KB) or the services section of this Web site.

» Download Adobe Acrobat Reader

Examples

» Switching (No Routing) with IP Address for Network Management (pdf: 86.4 KB)
spacer image The Routing Switch is configured to switch all traffic and has an IP address for network management. Routing is disabled.

» IP Routing and Switching of Non-IP - No VLANs (pdf: 80.2 KB)
spacer image The Routing Switch is configured to route IP traffic and switch non-IP traffic between two ports. RIP version 1 is enabled.

» IP Routing with Switching Turned Off - No VLANs (pdf: 77.5 KB)
spacer image The Routing Switch is configured to route IP traffic between two ports. Non-IP packets will be dropped (not forwarded).

» Relaying DHCP Packets to a Remote Server (pdf: 91.3 KB)
spacer image The Routing Switch is configured to relay (route) DHCP traffic between a client and remote server, each on a different VLAN. All protocols are switched within each VLAN.

» IPX Routing (No VLANs) with NetBIOS Enabled (pdf: 91.2 KB)
spacer image The Routing Switch is configured to route IPX traffic between two ports with NetBIOS enabled. All other non-IPX traffic will be switched on these ports.

» IP Routing Between Port-Based VLANs (pdf: 85.9 KB)
spacer image The Routing Switch is configured to route IP between port-based VLANs. All protocols are switched within each VLAN.

» IP Routing in a Single Area OSPF Network (pdf: 72.9 KB)
spacer image The Routing Switches are configured to route IP traffic between OSPF and RIP domains. All protocols are switched within each VLAN.

» Routing IP, IPX, & AppleTalk Between Port-Based VLANs (pdf: 104 KB)
spacer image The Routing Switch is configured to route IP, IPX, and AppleTalk between port-based VLANs. All protocols are switched within each VLAN.

Printable version
Privacy statement Using this site means you accept its terms
© 2010 Hewlett-Packard Development Company, L.P.