Jump to content United States-English
HP.com HomeProducts and ServicesSupport and DriversSolutionsHow to Buy
» Contact HP
 
HP ProCurve Networking

» My ProCurve Sign In

HP ProCurve Networking  >  Technical support  >  Configuration examples

Configuration examples
 »

HP ProCurve Networking

These configuration examples apply to typical, simple situations. They can be easily customized to meet the needs of your environment. The examples below are for these products:

  • J4819A HP ProCurve Switch 5308xl
  • J4850A HP ProCurve Switch 5304xl

» View configuration examples for a different group of products

Customer Care
»  Overview
»  Services
»  Support
   »  Software
   »  Warranty
   »  FAQs
   »  Manuals
   »  Reference library
   »  Configuration examples
   »  Support forms
   »  Security notices
Commercial help me agent » Contact ProCurve

Notes

  1. These configurations have been tested and verified by HP ProCurve support engineers. However, HP does not guarantee that these exact configurations will work in your environment.
  2. You will need to modify these configurations depending on your model of switch, software version, VLAN port assignment, and your network's IP addresses.
  3. Information on how to troubleshoot configuration problems, including configurations based upon these examples, is not provided here. Please refer to the Troubleshooting chapter of your product manual for this type of information. If you need assistance from HP, please refer to the HP ProCurve Service & Support Guide (pdf: 165 KB) or the services section of this Web site.

» Download Adobe Acrobat Reader

Examples

» IP Routing Between VLANs (pdf: 209 KB)
spacer image The switch is configured to route IP between VLANs. All protocols are switched within each VLAN.

» Relaying DHCP Packets to a Remote Server (pdf: 222 KB)
spacer image The switch is configured to relay (route) DHCP traffic between a client and a remote server, each on a different VLAN. All protocols are switched within each VLAN.

» IP Routing in a RIP Network (pdf: 164 KB)
spacer image Two switches are configured to provide IP routing using RIP.

» IP Routing in a Single Area OSPF Network (pdf: 174 KB)
spacer image Two switches are configured to provide IP routing using OSPF.

Printable version
Privacy statementUsing this site means you accept its terms
© 2008 Hewlett-Packard Development Company, L.P.