|
| |
» |
|
|
|
|
 |
|
|
|
|
|
|
|
|
Version:
|
E.11.10 |
Posted Date:
|
20 January 2009 |
Build Date:
|
7 January 2009 |
File size:
|
4.68 MB |
- J4819A ProCurve Switch 5308xl
- J4850A ProCurve Switch 5304xl
- J4849A ProCurve Switch 5348xl
- J4848A ProCurve Switch 5372xl
- J8166A ProCurve Switch 5304xl-32G
- J8167A ProCurve Switch 5308xl-48G
|
|
|
|
|
|
|
|
|
|
|
| Description
This compressed, Zip-format file contains software version E.11.10 for the ProCurve Series 5300xl Switches. The compressed file contains the software itself (E_11_10.swi) and the release notes (5300xl-RelNotes-E1110-59912127.pdf). This release is described in detail in the document: Release Notes: Version E.11.10 Software for the ProCurve Series 5300xl Switches (pdf: 974 KB) located on the ProCurve Networking Web site. |
|
|
|
|
|
|
|
|
| Boot ROM Update Required! |
A successful update to E.11.02 or newer requires updating the 5300xl with the current Boot ROM version, E.05.05. The E.05.05 Boot ROM image was automatically installed on any switch running E.10.64 through or E.10.74 software versions. If your 5300xl is currently running a pre-E.07.37 software build, you must update the Boot ROM TWICE before installing E.11.xx. Please see details in the table below.
| If your current version is: |
Your next step should be: |
| E.05.04 through E.07.34 |
Update and reload into software version E.07.40 |
| E.07.35 through E.10.62 |
Update and reload into software version E.10.74 |
| E.10.64 or newer |
Update directly to software version E.11.xx |
|
|
|
|
|
|
|
|
|
|
|
|
IMPORTANT
Starting with software version E.10.09, FEC trunks (Cisco Systems’ Fast EtherChannel for aggregated links) are no longer supported, and generation of CDP (Cisco Discovery Protocol) packets are no longer supported. In their place are IEEE standards-based LACP aggregated links (as well as statically configured trunks) and generation of LLDP packets for device discovery. For more information, see the ProCurve Networking statement on standards-based configuration for link aggregation and device discovery. |
|
|
|
|
|
|
|
|
|
The startup-config file saved under version E.08.xx or E.09.xx is NOT backward-compatible with previous software versions. The user is advised to save a copy of the pre-08.xx startup-config file BEFORE UPGRADING to E.08.xx or greater, in case there is ever a need to revert back to pre-08.xx software. Instructions for saving a copy of the startup-config file are found in the "Transferring Switch Configurations" section of Appendix A in the Management and Configuration Guide that shipped with the switch.
|
|
|
|
|
Printable version
