|
| |
» |
|
|
|
|
 |
|
|
|
|
| | |
|
Version:
|
I.10.43 |
| Posted Date: |
24 September 2007 |
|
| Build Date: | 15 August 2007 |
|
| File size:
|
6.20 MB
|
|
| Products:
|
|
- J4903A ProCurve Switch 2824
- J4904A ProCurve Switch 2848
|
|
| |
| | |
|
|
|
|
| Description
This compressed, Zip-format file contains software versions I.10.43 and I.07.68 for the ProCurve Series 2800 Switches. This software release is described in detail in the document: Release Notes: Version I.10.43 Software (pdf: 1.20 MB) on the ProCurve Web site. The compressed file contains switch software (I_10_43.swi), (I_07_68.swi), and the release notes (2800-RelNotes-i1043-59906049.pdf).
|
| |
|
|
|
Boot ROM Update Required!
A successful update to I.10.43 requires updating the 2800 with the current Boot ROM version, I.08.07. The I.08.07 Boot ROM image is automatically installed on any switch running software version I.07.68. If your 2800 is currently running a pre-I.07.68 software version, you must update the Boot ROM before installing software version I.10.43 or greater. Load software version I.07.68 on your switch AND REBOOT from the I.07.68 software image.
NOTE: The I.10.43 download file (J49031032) includes the I.07.68 software. There have been subsequent updates to the Boot ROM since I.07.68 but an initial update (using I.07.68) is still required before installing I.10.xx software. Use the “Show Flash” command to check which version of Boot ROM your switch is running. If the version of your Boot ROM is already at I.08.02 or greater, you can simply install this latest release to update to the latest version.
|
| |
|
|
IMPORTANT
Starting with software version I.08.74, FEC trunks (Cisco Systems’ Fast EtherChannel for aggregated links) are no longer supported, and generation of CDP (Cisco Discovery Protocol) packets are no longer supported. In their place are IEEE standards-based LACP aggregated links (as well as statically configured trunks) and generation of LLDP packets for device discovery. For more information, see the ProCurve Networking statement on standards-based configuration for link aggregation and device discovery. |
| |
| | |
|
IMPORTANT
Software version I.08.71 (or later) detects and disables non-genuine ProCurve transceivers and mini-GBICs discovered in Series 2800 Switch ports. When a non-genuine device is discovered, the switch disables the port and generates an error message in the Event Log. For more information, see ProCurve Networking policy on third party connectivity accessories. |
| |
| | |
|
|
Printable version
