| HP part number | ProCurve Switch 1800-8G
(J9029A) | ProCurve Switch 1800-24G
(J9028B) |
| Ports | 8 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)Media Type: Auto-MDIXDuplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
| 22 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)Media Type: Auto-MDIXDuplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only2 dual-personality portseach port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers)
|
| Physical characteristics | | |
| Dimensions | 4.58(d) x 7.73(w) x 1.73(h) in. (11.63 x 19.63 x 4.39 cm) (1U height) | 6.74(d) x 17.42(w) x 1.73(h) in. (17.12 x 44.25 x 4.39 cm) (1U height) |
| Weight | 1.19 lb. (0.54 kg), Fully loaded | 4.32 lb. (1.96 kg), Fully loaded |
| Memory and processor | | |
| 1 MB flash, 64 KB SDRAM, 1 MB RAM/ROM capacity; packet buffer size: 144 KB | 2 MB flash, 64 KB SDRAM, 2 MB RAM/ROM capacity; packet buffer size: 500 KB |
| Mounting | | |
| Horizontal surface mounting only
| Mounts in an EIA-standard 19 in. telco racks (hardware included)
|
| Performance | | |
| 100 Mb Latency | < 3.9 µs (64-byte packets) | < 4.7 µs (64-byte packets) |
| 1000 Mb Latency | < 2.1 µs (64-byte packets) | < 3.0 µs (64-byte packets) |
| Throughput | up to 11.9 million pps (64-byte packets) | up to 35.7 million pps (64-byte packets) |
| Switching capacity | 16 Gbps | 48 Gbps |
| MAC address table size | 8000 entries | 8000 entries |
| Environment | | |
| Operating temperature | 32ºF to 104ºF (0ºC to 40ºC) | 32ºF to 104ºF (0ºC to 40ºC) |
| Operating relative humidity | 10% to 90% @ 104ºF (40ºC), non-condensing | 10% to 90% @ 104ºF (40ºC), non-condensing |
| Non-operating/Storage temperature | -40ºF to 158ºF (-40ºC to 70ºC) | -40ºF to 158ºF (-40ºC to 70ºC) |
| Non-operating/Storage relative humidity | 10% to 90% @ 149ºF (65ºC), non-condensing | 10% to 90% @ 149ºF (65ºC), non-condensing |
| Altitude | up to 10000 ft. (3 km) | up to 10000 ft. (3 km) |
| Acoustic | Power: 0 dB no fan | Power: 0 dB no fan |
| Electrical characteristics | | |
| Maximum heat dissipation | 61 BTU/hr (64 kJ/hr) | 92 BTU/hr (97 kJ/hr) |
| Voltage | 100-240 VAC | 100-127 / 200-240 VAC |
| Current | 0.5 A | 0.8 / 0.4 A |
| Power consumption | 18 W | 27 W |
| Frequency | 60 Hz | 50 / 60 Hz |
| Notes | The exact input voltage and frequency rating are determined by the specific power adapter part number ordered. Please select the correct power adapter country option. | |
| Safety | | |
| CSA 22.2 No. 60950
EN 60950/IEC 60950
UL 60950
| CSA 22.2 No. 60950
EN 60950/IEC 60950
UL 60950
|
| Notes | | |
| |
| Use only supported genuine ProCurve mini-GBICs with your switch. |
|
| Use only supported genuine ProCurve mini-GBICs with your switch. |
|
