|
|
 |
|
|
ProCurve 10-GbE X2-SC LRM Optic (J9144A)
An X2 form-factor transceiver that supports the 10-Gigabit LRM standard, providing 10-Gigabit connectivity up to 220 meters on legacy multimode fiber.
NEW!
|
| |
| |
|
|
|
|
|
| | |
|
Ports
1 SC 10-GbE port (IEEE 802.3aq Type 10Gbase-LRM)
Duplex: full only
Physical characteristics
Dimensions: 3.54(d) x 1.59(w) x 0.7(h) in. (9.0 x 4.05 x 1.78 cm)
Weight: 0.29 lb. (0.13 kg)
Environment
Operating temperature: 32ºF to 158ºF (0ºC to 70ºC)
Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC)
Altitude: up to 10000 ft. (3 km)
Cabling
Type:
-
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch cord may be needed in some multimode fiber installations)
Maximum distance:
-
62.5 µm multimode cable @ 160/500 MHz*km = 0.5-220 meters
-
62.5 µm multimode cable @ 200/500 MHz*km = 0.5-220 meters
-
50 µm multimode cable @ 400/400 MHz*km = 0.5-100 meters
-
50 µm multimode cable @ 500/500 MHz*km = 0.5-220 meters
-
50 µm multimode cable @ 1500/500 MHz*km = 0.5-220 meters
Notes
1310 nm serial optics
For OM3 cable (50 µm multimode @ 1500/500 MHz*km), a mode conditioning patch cord is not required. Other multimode cables may require mode conditioning patch cords to achieve the maximum distances listed above.
See the document titled "Support for the J9144A 10-GbE X2-SC LRM Optic", on the "ProCurve 10-GbE Transceivers" Manuals Web page, for supported platforms and minimum software requirements to support this product
|
| |
| | |
|
|
