|
 |
 |
 | |  |
|---|
| |
All HP tape drives are tested on a wide range of HP and non-HP servers and workstations, but it is impossible to physically test every combination. Because the critical component in the connectivity process is the SCSI interface, it is safe to assume that if HP has tested a specific SCSI chipset and that chipset is used on other non-HP servers and workstations then there is a high confidence that the HP tape drives will work on the non-HP server which uses a tested SCSI chipset.
By cross checking the SCSI chipset on your server or workstation against those listed below you can accurately determine for yourself if the combination of HP tape drive and non-HP server/workstation will work.
|
| |  |  |  |
|
 | |
 |
|  | |  |
|---|
 | |
- HP does not support One Button Disaster Recovery on non-HP systems.
- For all internal drives listed below, the HP certified mounting method, as described in the product QuickSpec, must be used.
- To determine the SCSI chipset used in your server or workstation simply view the BIOS screen or start-up message as your system boots up.
|
 |
|
|  |  |  |  |
 |
|  | |  |
|---|
 | |
The following information shows supported HP tape backup solutions for Dell servers.
|
Dell Server |
Interface |
Recommended Host Bus Adapters |
HP StorageWorks Solution |
PowerEdge SC440
PowerEdge SC1430
PowerEdge 840
PowerEdge 1900
PowerEdge 2900
PowerEdge 6800
|
|
|
HP SC44Ge PCIe SAS HBA (416096-B21) |
|
|
|
HP SC11Xe PCIe Ultra320 SCSI HBA (412911-B21) |
» DAT 40 SCSI (i, e, m)
» DAT 72 SCSI (i, e, m)
» DAT 72x10 Tape Autoloader (1U)
» DAT 160 SCSI (i, e)
» LTO-1 Ultrium 232 SCSI (i, e)
» LTO-2 Ultrium 448 SCSI (i, e, m)
» LTO-3 Ultrium 920 SCSI (i, e)
» LTO-3 Ultrium 960 SCSI (i, e, m)
» LTO-4 Ultrium 1760 SCSI (i, e)
» LTO-4 Ultrium 1840 SCSI (i, e, m)
» 1U SCSI Rack
» 3U SCSI Rack
» Tape Array 5300 Rack |
|
|
|
|
|
|
PowerEdge 860
PowerEdge SC1435
PowerEdge 1950
PowerEdge 2850
PowerEdge 2950
PowerEdge 2970
PowerEdge 6850
PowerEdge 6950
|
|
|
HP SC44Ge PCIe SAS HBA (416096-B21) |
|
|
|
HP SC11Xe PCIe Ultra320 SCSI HBA (412911-B21) |
|
|
|
|
|
(e) external (i) internal (m) rack-mount (1U) 1 rack unit
Internal
mounting drives require Dell Kit P/N U1574 for correct installation on the 6800 servers
For rack
environments, please use the
HP StorageWorks 1U (half height drives only) or 3U Rackmount kit or the
HP StorageWorks Tape Array 5300 with the appropriate internal or "m" tape
drive.
» Please click here to return to the top of the page
|
|
|  |  |  |  |
 |
 |
 |
 |
 |
 |
|