Hardware compatibility

HP strategy

Storage products

HP Storage

HP Servers

Customer Assistance

HP Systems Compatibility

Non-HP compatibility

Software compatibility

Tools

Internal Models:

Not supported.

» Please click here to return to the top of the page
 

External Models:

Q1574A - HP StorageWorks DAT 160 SCSI External Tape Drive

» Please click here to return to the top of the page
 

Rack-Mount Models:

HP offers the following rack enclosures for the HP StorageWorks DAT 160 SCSI . To visit the product web page please click on the product name.

» 1U Rack-Mount Kit   » QuickSpecs

• A7445B - HP StorageWorks 1U SCSI Rack-Mount Kit
  Accommodates up to two internal half-height drives. Use standard internal tape drive to configure.
• Q1573A - HP StorageWorks DAT 160 SCSI Internal Tape Drive

» 3U Rack-Mount Kit   » QuickSpecs

• 274338-B22 - HP StorageWorks 3U SCSI Rack-Mount Kit
  Accommodates up to four internal half-height drives or two full-height drives. Use standard internal tape drive to configure.
• Q1573A - HP StorageWorks DAT 160 SCSI Internal Tape Drive

» Tape Array 5300   » QuickSpecs

• C7508B - HP StorageWorks Tape Array 5300
  Accommodates up to four offline hot-swap half-height drives or up to two offline hot-swap full-height drives. Use the appropriate tape drive array module to configure.
• Q1575A - HP StorageWorks DAT 160 SCSI Array Module - Offline hot-swap tape drive for HP StorageWorks Tape Array 5300.
  
  Note: The Tape Array 5300 includes options for redundant, hot-swap power supply and fan kits. Please select the appropriate option from the product QuickSpec.
  Note: External SCSI cables are not included with the Tape Array 5300. Please select the appropriate cable option from the product QuickSpec.

» Please click here to return to the top of the page
 

Compatible Controllers, Host Bus Adapters and Switches:

The HP 9000 rp4410 has a suitable SCSI channel (external channel B only) for connecting the HP StorageWorks DAT 160 SCSI under the following conditions. When the HP StorageWorks DAT 160 SCSI is connected to external SCSI port B the server must be configured in Simplex mode and have no other non-tape devices attached on the same channel (refer to server manual for details on Simplex mode). If this channel is not available for tape-only connect please use one of the following compatible HBAs:

A7173A - HP Dual Channel Ultra320 SCSI PCI-X HBA
AB290A - HP Dual Channel PCI-X SCSI Ultra320 & Gigabit Ethernet combo card
A6829A - HP Dual Channel Ultra3 SCSI HBA (HP-UX) (Retired)
A6828A - HP Single Channel Ultra3 SCSI HBA (HP-UX) (Retired)

» Please click here to return to the top of the page
 

Server OS Support:

The links below show which operating systems supported by this server support the HP StorageWorks DAT 160 SCSI . For a more comprehensive list of supported operating systems and backup applications for the HP StorageWorks DAT 160 SCSI please visit the software compatibility table.

Click the operating system appropriate for your configuration to see the list of supported backup applications.

HP-UX 11i v3
HP-UX 11i v2
HP-UX 11i v1

Note: This page only shows that the HP StorageWorks DAT 160 SCSI can be physically and electrically connected to the HP 9000 rp4410 .

» Please click here to return to the top of the page
 

Related Options & Support:

Media

C8011A - HP DAT 160 data cartridge (160 GB, compressed)
C8015A - HP DAT 160 cleaning cartridge

Ignite-UX boot from tape

The HP StorageWorks DAT 160 SCSI fully supports Ignite-UX boot from tape recovery for the HP-UX 11i operating system. Please refer to the Ignite-UX installation and booting guide on the Ignite-UX web site for more support information and step-by-step guides on using Ignite-UX with the HP 9000 rp4410 .

» Ignite-UX installation and booting guide

» Please click here to return to the top of the page