Jump to content United States-English
HP.com HomeProducts and ServicesSupport and DriversSolutionsHow to Buy
» Contact HP
 
HP.com home Storage  >  Tape Storage  >  Backup compatibility  >  Tape backup  >  HP 9000 Servers

Hardware compatibility
 »

HP StorageWorks

HP strategy
»Adaptive Infrastructure
»Information Lifecycle Management
»Storage Virtualization

Storage products
»Disk Storage Systems
»Storage Software
»Tape Storage & Media
»Storage Archiving
»Storage Networking
»Storage Solutions
»Browse by capacity or operating system
»

HP Storage

»

HP Servers

Customer Assistance
»Contact HP
»How to buy
»Promotions
»Services
»Storage Training
»Subscribe

Selected options
Server: HP 9000 rp3440
Backup device: HP StorageWorks DAT 72x10 Tape Autoloader


(U.S. SMB store)

The HP StorageWorks DAT 72x10 Tape Autoloader is an ideal industrial standard backup solution for the small to medium size company with limited IT support or a remote site of larger organizations. By reducing administrative tasks, the DAT 72x10 Tape Autoloader not only simplifies the backup process but reduces the risk of error as well and with the ability to store up to 72 GB per DAT 72 data cartridge, the DAT 72x10 Tape Autoloader provides a quick, efficient means for reducing workload.

» QuickSpecs

HP Systems Compatibility
»HP ProLiant servers
»HP Storage servers
»HP Integrity servers
»HP 9000 servers
»HP AlphaServer
»HP Workstations
»

Non-HP compatibility

»

Software compatibility

Tools
»HP StorageWorks Library and Tape Tools
»HP Storage Product Selector
»HP ActiveAnswers

Quick navigation
» Internal Models » External Models » Rack-Mount Models
» Controllers & HBAs » Server OS Support » Options & Support

Hardware and software compatibility

Internal Models:

Not applicable.

» Please click here to return to the top of the page
 

External Models:

Not applicable.

» Please click here to return to the top of the page
 

Rack-Mount Models:

AE313A - HP StorageWorks DAT 72x10 SCSI Tape Autoloader

» Please click here to return to the top of the page
 

Compatible Controllers, Host Bus Adapters and Switches:

The HP 9000 rp3440 has a suitable external SCSI channel for connecting the HP StorageWorks DAT 72x10 Tape Autoloader under the following conditions:

  • When the HP StorageWorks DAT 72x10 Tape Autoloader is connected to the external SCSI port no other non-tape device should be attached and hard disk slot ID2 must be left unused.
  • A 68-pin HD connector to 68-pin HD connector SCSI cable must be used. The recommended part for this configuration is the HP C2979B - SCSI cable, HDTS68, M/M, 1.5m (59in).

    For more cable options please browse the current range of HP SCSI multimode cables at:
    http://h18004.www1.hp.com/products/servers/proliantstorage/bcs-rackandpower/
    data-cables/SCSI_multimode.html
If the external SCSI channel on the HP 9000 rp3440 is not available for tape-only connect please use one of the following compatible HBAs:

A7173A - HP Dual Channel Ultra320 SCSI PCI-X HBA
AB290A - HP Dual Channel PCI-X SCSI Ultra320 & Gigabit Ethernet combo card
A6829A - HP Dual Channel Ultra3 SCSI HBA (HP-UX) (Retired)
A6828A - HP Single Channel Ultra3 SCSI HBA (HP-UX) (Retired)

» Please click here to return to the top of the page
 

Server OS Support:

The links below show which operating systems supported by this server support the HP StorageWorks DAT 72x10 Tape Autoloader . For a more comprehensive list of supported operating systems and backup applications for the HP StorageWorks DAT 72x10 Tape Autoloader please visit the software compatibility table.

Click the operating system appropriate for your configuration to see the list of supported backup applications.

HP-UX 11i v3
HP-UX 11i v2
HP-UX 11i v1

Note: This page only shows that the HP StorageWorks DAT 72x10 Tape Autoloader can be physically and electrically connected to the HP 9000 rp3440 .

» Please click here to return to the top of the page
 

Related Options & Support:

Media

C8010A - HP DAT 72 data cartridge (72 GB, compressed)
C5709A - HP DDS cleaning cartridge

Ignite-UX boot from tape

The HP StorageWorks DAT 72x10 Tape Autoloader fully supports Ignite-UX boot from tape recovery for the HP-UX 11i operating system. Please refer to the Ignite-UX installation and booting guide on the Ignite-UX web site for more support information and step-by-step guides on using Ignite-UX with the HP 9000 rp3440 .

» Ignite-UX installation and booting guide

» Please click here to return to the top of the page
 

Disclaimer
HP makes every effort to ensure compatibility by continual validation, but many factors outside our test environment can affect compatibility and performance. HP cannot accept liability for problems that may occur due to factors outside of our control. In the event that compatibility and/or performance is not as expected for your specific environment please contact HP for assistance in finding a solution that best suits your needs.

Please note that some links on this site may take you to other web sites, which HP does not control. HP is not responsible for information you may find there.
Printable version
privacy statementusing this site means you accept its termsfeedback to webmaster
© 2008 Hewlett-Packard Development Company, L.P.