| Product number |
AB290A |
| Description |
PCI-X Dual port U320 SCSI and Dual port 1Gb Ethernet adapter |
| PCI-X |
PCI-X 1.0a complaint
Compatible with 3.3V only
PCI bus speed 64-bit (133 MHz)
Backward compatible with PCI 2.2 systems
|
| LAN Ports |
2 |
| SCSI Ports |
2 |
| Configuration |
Two independent sets of configuration space |
| Activity and Status LED Indicators |
LAN and SCSI |
| Dimensions |
L = 8.5 in (21.6cm)
W = 0.7 in (2 cm)
H = 4.25 in (10.8cm)
|
| Supported Operating System |
HP-UX 11i v1; HP-UX 11i v2 |
| Gigabit Ethernet Functionality |
|
| Ports |
2 (independent) RJ45 |
| Connectivity |
Category 5 (Cat-5) unshielded twisted pair (UTP) balanced copper wiring for distances up to 100 meters as defined by ANSI/TIA/EIA-568-A (1995) cabling standard |
| Duplex |
IEEE 802.3u CSMA/CD (Half Duplex) MAC
- or -
IEEE 802.3x Full Duplex for frame base flow control MAC |
| Boot Support |
Yes |
| Ethernet Standards |
IEEE 802.3z standard |
| Max Data Rate |
1000 Mbps each port |
| Sustained Data Rate |
Configuration dependent. Single port GigE performance comparable to A6825A single port GigE performance in PCI-X based systems. Refer to HP's white paper for details. |
| System Administration Manager (SAM) Configurable |
Yes |
| Point-to-Point (NIC to NIC) connections |
Yes |
| HP MAC address |
Yes |
| Auto-Sensing (10/100/1000) |
Yes |
| Auto-Negotiation |
The tri-speed intelligent adapter autonegotiates to the highest available link speed |
| HP Data Link Provider Interface |
IEEE 802.3 LLC |
| Dual port U320 SCSI Functionality |
|
| Channels |
2 (independent) |
| LEDs |
- Termination Enable
- Activity |
| Boot Support |
Yes |
| Max data rate |
320 Mbps on each channel |
| Signaling |
LVD (Low Voltage Differential) and SE (Single Ended) |
| Max Cable Length |
10m |
| Max Devices |
15 |
| VHDCI (Very High Density Cable Interconnect) |
Yes -- Stacked. |
| Bootable |
Yes |
| Connectors |
VHDCI |
| Automatic termination |
Auto termination -- channel B
Static termination (jumper) -- channel A |
| Self resetting TermPower fuse |
Yes |
| Platforms |
Maxium Cards Supported |
| Integrity Superdome sx2000 |
192 |
| HP Integrity Superdome sx1000 |
191 |
| HP 9000 Superdome PA 8800/PA 8900 |
191 |
| |
|
| rx8640 |
16 |
| rx8620 |
16 |
| rx7640 |
16 |
| rx7620 |
15 |
| rx6600 |
6 |
| rx4640 |
6 |
| rx3600 |
6 |
| rx2620 |
3 |
| rx1620 |
1 |
| |
|
| rp8420 |
16 |
| rp7420 |
15 |
| rp4440 |
6 |
| rp4410 |
6 |
| rp3440 |
3 |
| rp3410 |
2 |
| Environmental/regulatory specifications |
|
| Temperature |
Non-operating: -40° to +70° C (-40° to 158° F)
Operating: +5° to +40° C (41° to 104° F)
Recommended Operating: +20° to +30° C (68° to 86° F) |
| Humidity |
Recommended Operating: 15% to 80% RH at 22° C (70° F) |
| Altitude |
10,000 ft (3.1 km) |
| Electromagnetic compatibility |
North America: FCC Part 15, Class A
International: CISPR 22 / EN 55022 Class A
EN 50082-1
EMC Directive Compliance |
| Recommended SCSI cables for LVD or SE Devices |
|
| C2361B |
1.0 M VHDCI to 68 pin HD SCSI Cable |
| C2362B |
2.5 M VHDCI to 68 pin HD SCSI Cable |
| C2365B |
5.0 M VHDCI to 68 pin HD SCSI Cable |
| For LVD only (due to length) |
|
| C2363B |
10.0M VHDCI to 68 pin HD SCSI Cable |
| Recommended LVD/SE Multimode SCSI Terminators |
|
| C2364A |
68 pin HD (High Density) LVD/SE Multimode terminator |
| C2370A |
68 pin VHDCI LVD/SE Multimode terminator |
