| Product number |
AD194A |
| Description |
PCI-X 2-port 4Gb Fibre Channel and 2-Port 1000Base-T Gigabit Ethernet multifunction adapter |
| PCI-X |
PCI-X 1.0a complaint
Backward compatible with PCI 2.2
PCI bus speed 64-bit, 133 MHz
3.3 volt keyed (no 5.0 volt support)
|
| Supported systems |
HP 9000 Superdome (3.3 volt slots)
rp8440
rp8420
rp7420
rp4440
rp4410
rp3440
rp3410
Integrity Superdome
rx8640
rx8620
rx7640
rx7620
rx6600
rx4640
rx3600
rx2600 series
rx1600
|
| Supported operating systems |
HP-UX 11i v1
HP-UX 11i v2
|
| Channels/ports |
2-port 4Gb FC
2-Port 1Gb Ethernet |
| Connectors |
Two LC (SFF) 4Gb Fibre Channel
Two RJ-45 1000 Base-T |
| Dimensions |
Height: 2.0 cm (0.7 in)
Width: 16.9 cm (6.6 in) (short form factor)
Depth: 10.8 cm (4.25 in)
|
| Weight |
0.4 lb (0.18 kg) |
| Fibre Channel functionality |
|
| Transfer rate |
4Gb, 2GB, and 1Gb
Auto speed sensing |
| Maximum transfer rate |
800 MB/s full duplex
400 MB/s half duplex |
| Boot support |
Yes |
| Fibre Channel protocols |
SCSI-FCP
FC-Tape |
| Fibre Channel topology |
FC-SW
FC-AL-2
FC-FLA
FC-PLDA
FC-PI
|
| LEDs |
One 4Gb link/activity
One 2Gb link/activity
One 1Gb link/activity
|
| Gigabit Ethernet Functionality |
|
| Connectivity |
Category 5 (Cat-5) unshielded twisted pair (UTP) balanced copper wiring for distances up to 100 meters as defined by ANSI/TIA/EIA-568-A (1995) cabling standard |
| Boot Support |
Yes |
| System Administration Manager (SAM) Configurable |
Yes |
| Point-to-Point (NIC to NIC) connections |
Yes |
| Auto-Sensing (10/100/1000) |
Yes |
| Transfer rate |
10/100/1000 Mbps |
| VLAN support |
Yes |
| CPU offload feature |
Yes |
| Jumbo frame support |
Yes |
| Auto Port Aggregation (APA) support |
Yes |
| Ethernet standard |
IEEE 802.3ab |
| LEDs |
Integrated into RJ45: Link/Activity
Speed |
