 |
This document contains the latest information on peripherals that can be used with HP 1000 Computers. It is commonly referred to as the "Peripherals Support Matrix".
IMPORTANT - PLEASE DISCARD ALL PREVIOUS UPDATES !!!
For the latest changes to this matrix please see What's New below.
For a complete history of the changes made to this matrix please see Change Highlights history at the end of this document.
Peripheral categories
The following keys are used to define the various "Support"
categories. Since every possible configuration involving these
products cannot be evaluated, unless otherwise noted -
"SUPPORT" refers only to "STAND-ALONE" items.
| Support Term |
Support Term Definition/Explanation |
| Yes |
Appropriate drivers exist. This device has been tested, and
is supported by HP. (NOTE - For devices which can be connect-
ed either via HP-IB or RS-232 interfaces, "Yes" means that
the product is "Supported" on both types of interface.
Appropriate RFI testing in both "stand-alone" and in "system"
configurations has been performed and passed. |
| No |
Drivers do not exist, and the device will not work. RFI test-
ing in a system config has not been done. (RFI testing of the
"stand-alone" product has been done. |
| Unsupt |
Drivers exist, but the device has NOT been tested by HP. The
customer may attach the device, but does so entirely at his
own risk. HP will not offer a support contract on customer -
generated configurations. RFI testing of only the "stand-
alone" product has been done. |
| HP-IB |
Drivers exist, but the device has only been tested with, and
is only supported in configurations using, HP-IB interfaces. |
| SCSI |
Drivers exist, but the device has only been tested with, and
is only supported in configurations using, SCSI interfaces. |
| RS-232 |
Drivers exist, but the device has only been tested with, and
is only supported in configurations using), RS-232 interfaces. |
| 6.X |
Support for this device will occur at O/S revision 6.X. |
What's New
Changes effective with the 10/5/99 matrix -
New Disks and DDS drives have been certified for the A-Series.
These devices come from two different vendors, Bering and Gedanken.
Note: You will need to order these devices directly from
these vendors. Check their web sites
(Gedanken or
Bering Technology, Inc.)
for more information.
The Bering disk drive (Model 800H - Option 04) is a SCSI
drive with a 4.5GB capacity. One DDS II drive has also been
qualified (Model 800H Option 42 8GB).
The HP1000 hardware peripherals that Gedanken supports are
both called the Zip1K, and there are two models, the model T
(table top enclosure) and the model R (Rack mount enclosure).
Both models come standard with a 100MB removable ZIP
cartridge drive and a 4GB HDD, and use the SCSI interface.
Options include: option MO (magneto-optic drive) and option DT
(DDS tape drive).
Back to Top
terminals
TERMINALS E/F A Graphics EOSL
--------- (AGP/DGL)
2382A Alpha Terminal YES YES 2/1/91
2392A Display Terminal YES YES 11/1/98
2393A Monochrome Graphics YES YES YES 5/1/99
2394A Data Entry NO NO 1/31/99
2397A Color Graphics YES YES YES 6/1/99
2621A/B/P Alpha Terminals (Obsolete) YES YES 12/1/93
2622A Data Entry (Obsolete) YES YES 9/1/97
2623A Graphics (Obsolete) YES YES YES 9/1/97
2624B Data Entry (Obsolete) YES YES 4/1/99
2625A IBM 3270 YES YES YES 12/1/93
2626A Display Station YES YES 12/1/93
2627A Color Graphics YES YES YES 12/1/93
2628A HP WORD Terminal YES YES YES 12/1/93
264X (Discontinued Terminals)* YES NO *2747F only 12/1/97
9807A Integral - as 2622A NO NO 7/1/99
45610B HP150 - as 2623A YES YES YES *** 12/1/93
45850A HP150-II (Obsolete) YES YES YES *** 5/1/99
45851A HP150-II (Obsolete) YES YES YES *** 5/1/99
47710A/B HP110 - (Obsolete) NO NO N/A
47711A/B HP110+ - as 2392A NO NO N/A
72425A/45A Vectra w/AdvanceLink YES YES 4/1/93
72435A Vectra w/AdvanceLink YES YES 6/1/97
Vectra w/AdvanceLink(2627 Graphics Emulator) NO YES YES N/A
C1004A/G/W 700/22 (DEC Compatible) NO NO 11/1/97
C1003A/G 700/41 (Entry Level Terminal) NO NO 11/1/97
C1005A/G/W 700/71 (IBM 3191 Compatible) NO NO 11/1/97
C1001A/G/W 700/92 2392A Replacement YES YES 1/31/99
C1002A/G/W 700/94 2394A Replacement NO NO 9/1/98
C1064A/G/W 700/96 Terminal YES YES N/A
C1065A/G/W 700/98 Terminal YES YES N/A
C1084A/G/W 700/96 Energy-Saving Terminal YES YES N/A
C1085A/G/W 700/98 Energy-Saving Terminal YES YES N/A
98791B 2392A Emulator for 200/300 NO NO 7/1/95
Industrial Terminals
--------------------
3081A Rugged Terminal YES YES 9/1/95
3082B Rugged Terminal NO YES 9/1/95
9666A Ruggedized 2397A NO NO 5/1/99
* - Not RFI tested; most 264X terminals EOSL were on or before this date.
** - Supported also as a system console.
*** - With Terminal I.D. as 2623
Monitors (connect via 12065A interface)
---------------------------------------
D1187A 20 inch 1280x1024 monitor NO YES 11/30/98
Interfaces
----------
2342A HP Baseband LAN 8-port Term. Server NO YES 12/1/97
12016A SCSI (HP1000 A-Series Interface) NO YES N/A
Back to Top
Mass storage device support on the HP1000
3rd. Party disk and tape drives available.
RTE-A RTE-A RTE-A
Product Hard Soft Sup- Boot Load
Number Disc Media Port Device Device Options Vendor
800H ! 4.5GB - SCSI YES NO 04 Bering
ZIP1K ! 4GB 100MB ZIP SCSI YES NO T/R Gedanken
800H ! - 8GB DAT SCSI NO NO 42 Bering
HP Disk Drives
RTE-A RTE-A RTE-A RTE-6 RTE-6 RTE-6
PRODUCT HARD SOFT SUP- BOOT LOAD SUP- BOOT LOAD
NUMBER DISC MEDIA PORT DEVICE DEVICE PORT DEVICE DEVICE EOSL
7911P/R 28MB 1/4" TAPE YES YES YES YES YES %YES 5/1/99
7912P/R 64MB 1/4" TAPE YES YES YES YES YES %YES 5/1/99
7914P/R 128MB 1/4" TAPE YES YES YES YES YES %YES 5/1/99
7933A 404MB - YES YES NO YES YES NO 4/30/98
7935A 404MB - YES YES NO YES YES NO 5/1/98
7936H 307MB - YES YES NO YES YES NO 4/30/01
7937H 571MB - YES YES NO YES YES NO 4/30/01
7941A 24MB - YES YES NO YES YES NO 1/1/99
7942A 24MB 1/4" TAPE YES YES YES YES YES %YES 5/1/99
7945A 55MB - YES YES NO YES YES NO 1/1/99
7946A 55MB 1/4" TAPE YES YES YES YES YES %YES 5/1/99
7957A 80MB YES YES NO YES YES NO 5/1/99
7958A 130MB YES YES NO YES YES NO 12/31/98
7957B 81MB YES YES NO YES YES NO 7/31/02
7958B 152MB YES YES NO YES YES NO 7/31/02
7959B 300MB YES YES NO NO NO NO 8/31/01
7962B 152MB (expandable)YES YES NO NO NO NO 4/30/01
7963B 304MB (expandable)YES YES NO NO NO NO 4/30/01
7907A #21/21MB - YES YES NO YES YES NO 12/31/99
7906A #19/10MB - YES YES NO YES YES YES 10/1/96
7906B #19/10MB - YES YES NO YES YES YES 6/30/97
7906S #19/10MB - NO NO NO YES YES YES 10/1/96
7920M 50MB - YES YES NO YES YES YES 10/1/96
7920S 50MB - NO NO NO YES YES YES 8/9/98
7925M 120MB - YES YES NO YES YES YES 3/1/98
7925S 120MB - NO NO NO YES YES YES 9/1/99
9262B 152MB (Removable) YES YES NO NO NO NO 8/9/98
9263B 304MB (Removable) YES YES NO NO NO NO 8/9/98
9133D 15MB 630KB MFL. YES YES +NO NO NO NO 4/1/96
9133H 20MB 630KB MFL. YES YES +NO NO NO NO 4/1/96
9133L 40MB 630KB MFL. YES YES +NO NO NO NO 4/1/96
9134D 15MB - YES YES NO NO NO NO 4/1/96
9134H 20MB - YES YES NO NO NO NO 4/1/96
9134L 40MB - YES YES NO NO NO NO 4/1/96
9153B 20MB 630KB MFL. YES YES +NO NO NO NO 7/1/96
9154B 20MB - YES YES NO NO NO NO 7/1/93
9153C 40MB 1.2MB FL. YES YES NO NO NO NO 11/1/97
7914TD 128MB 1600bpi YES YES YES YES YES YES 4/1/99
7914ST 128MB 800/1600 YES YES YES YES YES YES 8/1/93
7914CT 128MB 1/4" YES YES YES YES NO &YES 5/1/99
C2200A 335MB YES YES NO YES YES NO 5/1/99
C2202A 670MB YES YES NO YES YES NO 1/1/99
C2203A 670MB YES YES NO YES YES NO 12/31/98
C2212A, C2290A 332 MB SCSI YES NO NO NO NO 5/1/99
C2213A, C2291A 660 MB SCSI YES NO NO NO NO 4/30/98
C2214B, C2295B 1300 MB SCSI YES NO NO NO NO 8/31/99
C2217T, C2474T 1300 MB SCSI YES NO NO NO NO 8/31/99
C2462F, C2474F 1300 MB SCSI YES NO NO NO NO 8/31/99
C2462R, C2474R 1300 MB SCSI YES NO NO NO NO 8/31/99
C2216T, C2473T 670 MB SCSI YES NO NO NO NO 8/31/99
C2461F, C2473F 670 MB SCSI YES NO NO NO NO 8/31/99
C2461R, C2473R 670 MB SCSI YES NO NO NO NO 8/31/99
C2460F, C2472F 420 MB SCSI YES NO NO NO NO 8/31/99
C2460R, C2472R 420 MB SCSI YES NO NO NO NO 8/31/99
C2482A, C2492A 1300 MB SCSI YES NO NO NO NO 8/31/99
C2481A, C2491A 670 MB SCSI YES NO NO NO NO 8/31/99
C2472R, C2472S 420 MB SCSI YES NO NO NO NO 8/31/99
C2474R, C2474S 1300 MB SCSI YES NO NO NO NO 8/31/99
C2473R, C2473S 670 MB SCSI YES NO NO NO NO 8/31/99
C3020T ! 1GB / 2.0GB SCSI YES NO NO NO NO 4/30/00
C3020R ! 1GB / 2.0GB SCSI YES NO NO NO NO 4/30/00
C3021T ! 2GB / 2.0GB SCSI YES NO NO NO NO 4/30/00
C3021R ! 2GB / 2.0GB SCSI YES NO NO NO NO 4/30/00
C3022T ! 1GB SCSI YES NO NO NO NO 2/1/00
C3022R ! 1GB SCSI YES NO NO NO NO 2/1/00
C3023T ! 2GB SCSI YES NO NO NO NO 4/30/00
C3023R ! 2GB SCSI YES NO NO NO NO 4/30/00
C3024T ! 2GB + 2GB SCSI YES NO NO NO NO 4/30/00
C3024R ! 2GB + 2GB SCSI YES NO NO NO NO 4/30/00
C3027U ! 1GB SCSI YES NO NO NO NO 2/1/00
C3028U ! 2GB SCSI YES NO NO NO NO 1/31/00
C3030T ! 1GB / 2.0GB SCSI YES NO NO NO NO 2/1/00
C3030R ! 1GB / 2.0GB SCSI YES NO NO NO NO 2/1/00
C3031T ! 2GB / 2.0GB SCSI YES NO NO NO NO 2/1/00
C3031R ! 2GB / 2.0GB SCSI YES NO NO NO NO 2/1/00
C3040R ! One 2GB Drive SCSI YES NO NO NO NO 9/30/02
C3040T ! One 2GB Drive SCSI YES NO NO NO NO 3/1/01
C3041R ! Two 2GB Drives SCSI YES NO NO NO NO 9/30/02
C3041T ! Two 2GB Drives SCSI YES NO NO NO NO 9/30/97
C3044U ! 2GB Upgrade Kit SCSI YES NO NO NO NO 3/1/01
C3660R ! 1GB SCSI YES NO NO NO NO 3/31/02
C3660T ! 1GB SCSI YES NO NO NO NO 9/30/02
C3661U ! 1GB Upgrade Kit SCSI YES NO NO NO NO 8/1/02
Back to Top
Magneto-optical disk drives
C1701A 650 MB SCSI YES NO NO NO NO 12/31/03
C1701C ! ^ 650 MB SCSI YES NO NO NO NO 4/30/04
C1701M ! ^ 650 MB SCSI YES NO NO NO NO 12/31/03
C1711C ! ^ 650 MB SCSI YES NO NO NO NO 4/1/04
C1711M ! ^ 650 MB SCSI YES NO NO NO NO 12/31/98
C1716T ! 1.3 GB SCSI YES NO NO NO NO 4/1/04
C2294A 650 MB SCSI YES NO NO NO NO 8/31/99
C2294U ! ^ 650 MB SCSI YES NO NO NO NO 9/1/99
C2550B ! 1.3 GB SCSI YES NO NO NO NO 4/1/04
Floppy disk drives
9121D - 2x270KB MFL. YES YES NO YES NO NO 12/1/95
9122D - 2x630KB MFL. YES YES +NO YES NO NO 9/1/96
9122C - 2x1.2MB MFL. YES YES +NO YES NO NO 11/1/98
9895A - 8" Floppy YES YES NO YES NO NO 8/1/91
Back to Top
HP tape drives
7970E - 1600 BPI YES YES YES YES YES YES 4/1/98
7974A - 800/1600 YES YES YES YES YES YES 9/1/96
7978A - 1600/6250 YES YES YES YES YES YES 4/1/99
7978B - 1600/6250 YES YES YES YES YES YES 9/1/98
7979A - 1600 YES YES YES YES YES YES 11/30/04
7980A - 1600/6250 YES YES YES YES YES YES 12/1/04
7980XC - 1600/6250 YES YES YES NO NO NO 10/31/04
7980S - 1600/6250 SCSI YES YES NO NO NO 4/30/03
7980SX - 1600/6250 SCSI YES YES NO NO NO 6/30/03
9144A - 1/4" TAPE YES YES YES &YES YES &YES 7/1/02
9145A - 1/4" tape YES YES YES NO NO NO 4/1/03
35401A 1/4" Autochanger YES YES YES NO NO NO 5/1/99
C1511A 1.3 GB HP-IB DAT YES NO YES YES NO NO 7/1/02
C1512A 1.3GB DAT SCSI YES YES NO NO NO 5/1/02
C1520B ! 2GB DAT SCSI YES YES NO NO NO 8/31/01
C1521B ! 8GB DAT SCSI YES YES NO NO NO 7/1/96
C2297U ! 2GB DAT SCSI YES YES NO NO NO 4/30/00
C2298U ! 8GB DAT SCSI YES YES NO NO NO 7/1/02
C2477U ! 2GB DAT SCSI YES YES NO NO NO 4/30/00
C2478U ! 8GB DAT SCSI YES YES NO NO NO 7/1/02
! - 12016A SCSI Interface requires firmware P/N 12016-80011 or greater
^ - WORM (Write once read many) mode is NOT supported on RTE-A
# - Hard disc storage is fixed/removeable.
+ - Will work as a load device using single sided 3 1/2" mflops, IF:
1) system is regenerated to include product number of peripheral, and
2) single-sided media is only read once. (See product champ for details)
& - Diagnostics can be loaded from a 9144, load support on RTE-6 for updates
ONLY. (NOTE - Special Loader ROM needed = P/N 93702A, Contact "Specials")
% - Loads RTE-6/VM offline using push-button restore.
@ - The E/F CPU may NOT be mounted in the base of the 7914ST.
| *** EVERY SYSTEM REQUIRES BOTH A BOOT DEVICE AND A LOAD DEVICE EITHER *** |
| *** PACKAGED SEPARATELY OR INTEGRATED TOGETHER INTO ONE PERIPHERAL. *** |
BOOT DEVICE = a supported device on which the operating system can reside when
the system is down. This peripheral will then allow the operating system
to be loaded into memory when the system is booted up.
LOAD DEVICE = a supported device which accepts the media that SWT uses to
distribute software (i.e., primary systems, drivers, compilers, etc., and
software updates).
NOTE: INCOMPATIBILITIES EXIST FOR MICROFLOPPIES FORMATTED ON EXTERNAL
DEVICES WHEN USED WITH INTEGRATED DOUBLE SIDED MICROFLOPPIES
OFFERED WITH MICROSYSTEMS. CONSULT FACTORY FOR DETAILS.
NOTE: microfloppies not available as system media for model 26/27/29 systems.
Back to Top
Plotters
PLOTTERS E/F A Graphics
-------- Support
7090A ANALOG RECORDER NO NO -
7440A 8 PEN, A-SIZE YES YES YES
7470A 2 PEN, A-SIZE YES YES YES
7475A 6 PEN, A/B-SIZE YES YES YES
7510A 35MM RECORDER NO YES YES
7550A 8 PEN, A/B-SIZE YES YES YES
7550B 8 PEN, A/B-SIZE YES YES YES
7570A 8 PEN, C/D-SIZE YES YES YES
7580A/B 8 PEN, A-D-SIZE YES YES YES
7585A/B 8 PEN, A-E-SIZE YES YES YES
7586B 8 PEN, A-E-SIZE YES YES YES
7595A DRAFTMASTER I (SINGLE SHEET FEED) NO YES YES
7596A DRAFTMASTER II (ROLL FEED) NO YES YES
C2847A DesignJet 600 A1/D NO YES YES
C2848A DesignJet 600 A0/E NO YES YES
Back to Top
Printers
LASER PRINTERS
--------------
2680A 45 PPM NO SPEC
2684A-P Laserjet 2000 (= "2684D") NO RS232 YES (1)
2686A/+ 8 PPM RS232 RS232 YES (2)
2687A 12 PPM NO YES
2688A 12 PPM NO SPEC
33440A LaserJet II NO RS232 YES (3)
33449A LaserJet III NO RS232 YES
33471A LaserJet NO RS232 YES
33471A LaserJet II P NO RS232 YES (4)
33481A LaserJet III P NO RS232 YES
33491A LaserJet III SI NO RS232 YES
33459A LaserJet III D NO RS232 YES
C2003A LaserJet 4L NO * Centronics
C2005A LaserJet 4P NO RS-232
C2010A LaserJet 4Si NO * Centronics/JetDirect
C2037A LaserJet Plus NO * RS-232/Cent./JetD
C3141A LaserJet 4V NO * Centronics/JetDirect
* - Products utilizing JetDirect LAN connections can only be accessed
via the LP Spooler (See RTE-A Print and Spooling Reference Manual,
P/N = 92077-90248
- Centronics connections cannot be supported with an HP-IB interface
without the use of an HP-IB/Centronics converter.
COLOR PRINTERS
--------------
3630A PaintJet Printer NO RS232 YES
C1602A PaintJet XL Printer NO RS232 YES
C1645A PaintJet XL 300 NO RS232 YES
C2114A DeskJet 500C NO RS232 YES
C2121A DeskJet 550C NO RS232 YES
DOT-MATRIX PRINTERS E/F A Graphics
------------------- (AGP/DGL)
2562C 420 LPM (A "Non-quietized 2563B) YES YES YES
2563A/B/C300 LPM YES YES YES
2564A/B/C600 LPM YES YES YES **
2565A 600 LPM YES YES YES **
2566A/B/C900 LPM YES YES YES **
2567B/C 1200 LPM NO NO
2932A 200 CPS (Industrial Envir.) RS232 YES YES
2934A 200/100/67 CPS (Industrial Envir.) RS232 YES YES
2235B Draft/Letter-Qual Modes = 480/240CPS NO YES YES
(Office Envir.)
2235D Draft/Letter-qual Modes = 480/240 CPS NO YES YES
(Office Envir.)
82906A 160 CPS Impact Printer HP-IB NO
C2356A 1100 LPM Impact Printer NO RS-232 NO
INKJET
------
2225A 150 CPS (HP-IB) NO NO
2225D 150 Cps Thinkjet (RS-232) RS232 RS232 YES
2227A 192 CPS Quietjet Plus NO RS232 YES
2228A 192 CPS Quietjet NO RS232 YES
2276A Deskjet Printer NO RS232
2277A Deskjet Plus Printer NO RS232
C2106A DeskJet 500 Printer NO RS232 YES
THERMAL
-------
2671G 120 CPS GRAPHICS HP-IB HP-IB
2673G 120 CPS INTELLIGENT GRAPHICS HP-IB HP-IB
DAISY-WHEEL
-----------
2601A 40 CPS DAISYWHEEL NO NO
2602A 25 CPS DAISYWHEEL NO NO
2603A 55 CPS DAISYWHEEL NO NO
** = Graphics available via Vector Graphics PCA - 26061A
(1) = With RS-232 I/F - 26843A
(2) = With I/F - 26054B
(3) = With additional memory - 33443A
(4) = With additional memory - 33474A
Back to Top
Change highlights - history
Changes effective with the 4/3/98 matrix -
Updated the End of Support Life (EOSL) dates for several
products, due to the extensions given by SSO (Service and
Support Organization).
Changes effective with the 1/28/98 matrix -
Added the End of Support Life (EOSL) dates for terminals,
monitors, and other interfaces.
Changes effective with the 9/9/97 matrix -
Updated document to HTML
Changes effective with the 9/4/97 matrix -
Added the End of Support Life (EOSL) dates for several of the
disk drives and tape drives.
Changes effective with the 8/04/95 matrix -
Disk Drives Added support for the following SCSI disk drives:
C3040R One 2 GB disk in a rack-mount encl.
C3040T One 2 GB disk in a mini-tower encl.
C3041R Two 2 GB disks in a rack-mount encl.
C3041T Two 2 GB disks in a mini-tower encl.
C3044U One 2 GB Upgrade kit for C3040X/C3041X
Magneto-optical Added support for the following MO products:
C1716T 1.3 GB MO drive for HP systems
C2550B 1.3 GB MO drive - standalone product
Terminals Added support for the following display terminals:
C1084A/G/W 700/96 Energy-Saving Terminal
C1085A/G/W 700/98 Energy-Saving Terminal
Changes effective with the 5/10/95 matrix -
Disk Drives Added support for the following SCSI disk drives:
C3660R One 1 GB disk in a rack-mount encl.
C3660T One 1 GB disk in a mini-tower encl.
C3661U One 1 GB upgrade kit for C3660X
Changes effective with the 05/10/93 matrix -
Terminals Included part numbers C1064 and C1065 to the
description of the 700/96 and 700/98 terminals
Monitors Added a section on monitors, and listed the
D1187A 20" Hi-Resolution monitor.
Disk Drives Added support for the following disks:
C2472R, C2472S, C2474R, C2474S, C2473R, C2473S
C3020T, C3020R, C3021T, C3021R, C3022M, C3022T
C3022R, C3023T, C3023R, C3024T, C3024R, C3027U
C3028U, C3030T, C3030R, C3031T, C3031R
Magneto-Optical Added section on Magneto-Optical Disk Drives.
Added support for the following MO disks:
C1701C, C1701M, C1711C, C1711M, C2294A, C2294U
Tape Drives Added Support for the following Tape Drives:
Magnetic Tapes - 7980XC, 7980SX
DDS (DAT) Tapes - C1521B, C2297U, C2477U, C2478U
Plotters Added Support for C2847A and C2848A plotters.
Printers Created separate sections for Dot matrix, Laser,
Color, Inkjet, Thermal, and Daisy Wheel printers.
Added support for C1602A, C1645A, C2114A, C2121A.
Changes effective with the 8/04/92 matrix -
Tape Drives The C1511A DAT Tape drive was incorrectly
listed as supported as a boot device. It
is supported only as a load device and as
a backup device.
Changes effective with the 7/15/92 matrix -
Tape Drives The 7980SX SCSI Tape Drive with Data Compression
is supported.
Printers The following printers are now supported in both
alpha and graphics mode. Graphics mode is sup-
ported using the PCL3 device handler - D0077.
C2106A DeskJet 500
33471A LaserJet II P
33481A LaserJet III P
33491A LaserJet III SI
33449A LaserJet III
33459A LaserJet III D
Changes effective with the 3/12/92 matrix -
Terminals HP's Vectra + Advancelink was added as a 2627A
graphics terminal emulator for the HP 1000 A-Ser.
Disks The following disk drives are now supported on
the 12016A SCSI Interface:
Single Ended SCSI Devices:
Same disk as an upgrade
Stand Alone P/N to HP's Mass storage sys.
--------------------------------------------
1.3GB C2214B C2295B
C2217T C2474T
C2462F C2474F
C2462R C2474R
670MB C2216T C2473T
C2461F C2473F
C2461R C2473R
420MB C2460F C2472F
C2460R C2472R
Differential SCSI Devices:
Same disk as an upgrade
Stand Alone P/N to HP's Mass storage sys.
--------------------------------------------
1.3GB C2482A C2492A
670MB C2481A C2491A
Tape Drives Added support for C1520B 2.0 GB SCSI DAT tape
and 7980S (SCSI) 9-track tape.
Changes Effective with the 6/21/91 matrix -
Terminals The 700/96 & 700/98 replace the 700/92 & 700/94
Discs The C2212 and C2213 SCSI discs were added
DAT The C1511A (HP-IB) and C1512A (SCSI) 1.3 GB DAT
Drives were added. ("1300" Series)
Changes effective with the 8/26/90 matrix -
Terminals 262X products - graphics supported on 2627F only.
700/96 - supported on E/F/A
Disks & Tapes Added C220X SCSI Disks and the C170X MO Drives
Monitors Added D1187 20" Hi-Res Monitor
Changes effective with the 11/8/89 matrix -
Laser Printers Revised the A-Series support to indicate that only
RS-232 is standard. HP-IB is available on selected
models as a "special".
Changes effective with the 9/7/89 matrix -
Printers The 2562C was added to the "supported" list. This
product is basically a "non-quietized" 2563B
(ie. - a 2562B with option 115). It is primarily
for manufacturing environments.
Terminals The 700/41 terminal has been removed from the list
of even "partially supported" (H/W only) terminals
for the A-Series. Although the H/W can be connect-
ed to the A-Series and will work, major efforts
must be expended before any S/W, including the O/S
or any utilities, will work.
Changes effective with the 6/16/89 matrix -
Disc Drives The 9262B and the 9263B are now also supported.
These are products very similar to the 7962B and
7963B, except they are targetted for applica-
tions requiring "secure" products.
They use the same power supply, HP-IB I/F, I/O
PCA, PCA controller, and mechanism. The 9262B has
one 152 MB removable mechanism, and the 9263B has
one 304 MB removable mechanism.
Changes effective with the 5/17/89 matrix -
Terminals The industrial terminal, 3082B, has now been
RFI tested - and is now supported on the A-Ser.
The 700/92, which is the replacement for the
2392A, is also supported on the E/F Series.
Disc Drives The 7963B and 9122C disc products are now sup-
ported on the A-Ser.
Printers New addition = the 2277A Desk Jet
Interfaces The new network interface, 2342A, described as a
HP Baseband LAN 8-port Terminal Server is now
supported on the A-Series. 'Has ThickLAN or Thin-
LAN options.
Changes effective with the 10/7/88 matrix -
Terminals Update and correction made to 3082A status
Changes effective with the 9/29/88 matrix -
Terminals Although the 264X terminals have been discontinued,
the Lab has re-visited this issue and has verified
that these products actually had been RFI tested
previously and should be considered "supported".
7936/37 These products had been previously listed as "A"
versions. In actuality, they should have been
listed as "H" versions.
New Products Support plans for several new products have been
included in the matrix. These products include
the 9145A, 7979A/80A, and 9144A as a boot device.
Changes effective with the 7/27/88 matrix -
Discs Clarification of the status of the 795X products.
Terminals Expanded comments regarding the 3082A terminal
Following is a 5/20/88 "Correction" to the previous issue...
Printers The 9122C has been listed as "Supported" in the
previous issues of the "Printers" section, but
listed in the "Mass Storage Device Support" table
as "Testing in Process - Not Released Yet!
At this time, the product has not completed RFI
testing and therefore CANNOT be considered as a
"Supported". This support will occur at 5.1, at
which time the 9122C will be supported ONLY on
RTE-A (including as a Boot device), but NOT on
RTE-VI. It will also NOT be supported as a Load
device on RTE-A.
Following is the only change made in this 4/5/88 version of the "Matrix"
Printers Added HP-IB and RS-232 to the 2225A and 2225D
descriptions, respectively. Also deleted the
footnote in the "support" columns for these items.
Following are the changes made in this 2/16/88 Peripherals Support Matrix.
Product Group Changes Made
Ind. Terminals Note of explanation added to 3082A
Discs A. Corrected 7959A to read 7959B
B. Added note of explanation for 7961B
and added comments regarding 7962B &7963B
C. Added 9122C
D. Added note regarding "Options" to 9153C
Following is a list of the changes made in the (1/26/88) version of the
Peripherals Support Matrix :
Product Group Changes Made
Terminals A. 45610B-HP150 |Both these products are
B. 45850/1A-HP150-II |"Supported" with Graphics
WITH Terminal I.D.d as a
2623.
C. 3082A is NOT SUPPORTED on E,F, or A Series.
Disc Storage A. 7936A, 7937A, 7957A, and 7958A are Supported.
B. 7959A, 7961B, 9153C, and 9154C are Supported
RTE-A only.
Mass Storage A. Same Support updates as shown in the Disc
Device Support Storage Section. (See Page 4)
B. The obsoleted products - 7906S, 7920S, and
7925S are now considered as "Supported" on
the A-Series. (However, the Lab does not
consider any of these devices as either
"Boot" or "load" devices. See Matrix on Pg5)
Tape Backup A. Delete *** note for 35401A
B. 7979A AND 7980A ARE SUPPORTED ON RTE-A.
Printers A. 2565A, 2566B, and 2567B do have Graphics
Support via Vector Graphics PCA #26061A.
B. Description of 2932A, 2934A, 2235B, and
2235D changed.
C. Expanded description for 82906A.
D. Added 2276A, 2684A, and 33440A.
E. Changed Support status of the 2225A.
Changes effective with the 11/12/87 matrix -
Section Changes
Terminals
----- Graphics (AGP/DGL) is now indicated
264X Added "Discontinued Terminals" to description
700/41 Description corrected to read "Entry Level ASCII
Terminal".
700/71 Description corrected to read "IBM 3191 Compatible".
Also, it is also NOT Supported on the A-Series.
Discs
* = Note The "*" was added to many of the products to indicate
which have been obsoleted. (New additions to this
category are constantly being made.)
Mass Storage Section
^ = Note The ^ was added to indicate which products have been
obsoleted. As stated above in the "Discs" section,
additions are constantly being made to this category.
> = Note This "Note" was deleted entirely.
Tape Backup
* = Note "*" was added to indicate those devices which
have been obsoleted.
** = Note "**" replaced "*" to indicate "Under Investigation"
*** = Note "***" replaced "**" for A-Series 35401A note.
Plotters
----- Graphics (AGP/DGL) is indicated
7595A "I" added to the Draftmaster description
7596A 7596a corrected to read 7596A. Also,"II" added to
the Draftmaster description.
3630A // added to indicate "NO Graphics Support"
Printers
------ Graphics Support (AGP/DGL) is also indicated
* = Note "*" was added to indicate those devices which
have been obsoleted.
Back to the Top
|
|
