Instructor-led training (
ILT) Onsite dedicated training (
OST)
Price
USD $8,450
CAD $10,140
Course overview
The shared maintenance training program is a hands on course. The course focuses on the operation and interaction of the mechanical, electronic, fluid and substrate transport systems on the HP Indigo Press. Participants will learn how to apply maintenance skills to resolve problems. This may include preventative and/or corrective actions, or via problem escalation through the Customer Support organization.
Prerequisites
A person who meets requirements for the Shared Maintenance course has a background of:
Performing preventative and corrective maintenance on complex electromechanical devices
Familiar with the use electronic test equipment
Has successfully completed the operator training program for the W3250 press
Has a minimum of three months experience operating the W3250 press
Audience
Qualified HP Indigo digital press operators who will be required to perform service routines that include troubleshooting, corrective maintenance and preventative maintenance on the W3250 press.
Ways to save
Onsite dedicated training course (OST) at your location
Course objectives
At the completion of this course you will be able to:
Understand of operation and interaction the major subassemblies
Troubleshoot and repair basic electrical problems
Troubleshoot and repair mechanical sub systems
Properly observe safety precautions to diagnose problems and perform repairs
Be able to perform mandatory preventive maintenance functions at prescribed intervals
Perform a system back-up
Competently maintain the press and minimize service calls
Next steps
Three to six months practical production experience running the press
HP Indigo Press 3500 Shared Maintenance
Benefits to you
Increased press uptime and availability
Service contract terms tailored to shared maintenance customer
Access to technical phone support
Course outline
Safety
Press safety
Removal of waste materials
System Overview
Mechanical
Pneumatic
Electrical
Fluid
Electrical 101
Digital volt meter basic operation
Basic wiring diagram
Interlock Mechanism
Interlock block diagram
FSE Screens
Touch screens
MMI
Cooling System
Imaging oil system
Theory/physical overview
Imaging oil flow adjustment
Ink System
Theory/physical overview
Ink pump maintenance
Flow adjustment
Density & conductivity calibration
Bid adjustments & troubleshooting
Electrometer
Theory & electrical flow
Gap and board calibration
Cylinders
1st transfer adjust & calibration
2nd transfer adjust & calibration
ITM lamp
Encoder replacement/calibration
ITM IR calibration
Contact brush replacement
Electrical
Programmable logic control (PLC) basics
PLC replacement, maintenance & troubleshooting
PLC memory card replacement
External electronic cabinets
Interface to print engine
Print engine electronics
WHS network scheme (Profibus,Modbus,CT-net and MPI bus)
Printable version
